Technicians Available Now 07/19/2021 Request Service

F3 error codes can be one of the most frustrating things about owning a GE oven. Not only is it tricky to fix since the manual does not list the problem, but it also stops all current operations on your oven. Here is our quick guide to solving a GE Oven F3 Error so you can save yourself time and money. 

 

Are GE Appliances good quality?

GE Appliances is a major home appliance that has manufactured 100 refrigerator models for over 125 years. The brand is committed to delivering quality and innovative products that are reliable and made to improve the life and comfort of many families worldwide.

 It is a popular choice among refrigerators due to its innovative features, impressive design styles, and durability. GE Appliances usually come in three major series —  the regular GE series, the GE Profile series, and the Cafe series.

Designer Appliances.com has been described as a dependable brand. Their refrigerators are built with great quality to make life easier for all customers. Here are some of the great qualities of a GE refrigerator. 

 

What does F3 Mean in an oven? 

When an F3 error code flashes, it generally means that the oven sensor has encountered an error and needs to be replaced.

According to Repair Clinic, the error means that a circuit has been exposed or broken. 

 

How do you reset a GE oven?

The entire process of resetting a GE oven is similar to resetting the processor in a laptop. It’s mainly done by switching off and restarting it to reboot the appliance. 

GE Appliance recommends switching off the breaker in the main panel that controls the oven receptacle. It’s best if leave this off for at least one minute before switching the oven back on. 

This step is very important even if the light or clock on the range is working. Lastly, make sure that the electronic clock on the stove goes off to confirm that the power to the stove is actually off. 

 

How do I troubleshoot my GE oven?

Troubleshooting your GE oven is an essential step for proper maintenance and improves the overall performance of your GE Oven. Before calling a technician to inspect your electric oven, here are 7 easy steps to troubleshoot and solve commonly encountered problems of a GE oven. 

 

Step 1

Check and see if your GE oven controls are set for bake or broil if the oven does not heat, but the burners do heat. Next, check the oven door and make sure it is unlocked. Move the lever to the unlocked position if it is locked. 

Step 2

Check the oven knobs making sure that they are in the correct position in case the device is not producing heat. If the knobs are removed, inspect them, and make sure you re-installed them properly. 

Step 3

Turn off the GE Oven by unplugging it and check the fuse. The fuse is usually located in the main house fuse box on the back of your unit. The location of the fuse may differ depending on the model, so refer to your unit’s manual. 

If the fuse looks black, brown, or smoky, replace it. We recommend you purchase a fuse from a retail, hardware, or appliance store. Bring the old fuse to a store representative so they can help you purchase the right replacement. 

Step 4

Insert the new fuse in the fuse box by pushing it into the holder until it snaps into place.

Step 5

Check the burner caps on your GE oven and make sure they properly fit their respective compartments. Make sure they are perfectly seated and do not wobble. Next, check the burner heads for dirt and debris. In case there is dirt or debris, clean them, and remove all the filth present. 

Step 6

Check your oven’s LED display. If you see error codes between F0 to F9, the key panel is likely damaged. These error codes could also mean the electronic control must be replaced. Contact a qualified appliance technician to inspect and repair the key panel and electronic control.

Step 7

If you see the following error code: “Bad Line”, contact a qualified technician immediately. This error code appears if the unit has not been wired correctly. If you see an FD or FC error code, the probe or receptacle must be replaced. Replacing these components is very difficult, so contact a qualified technician.

 

How Can I Fix the F3 Error Code on my GE oven?

According to Hunker.com, to fix the F3 error code on a GE oven, you must purchase a new oven sensor. These sensors can be found at many local repair shops or online shops like Part Wizards. GE has their own specific model that also works in other brands of ovens.

Check the warranty on your GE oven. The sensor may be covered under your warranty. In case your warranty is still active, you can receive free repair and successfully replace your GE sensor without spending a dime. 

When installing your new oven sensor, refer to your manual from your exact oven to find the location of the oven temperature sensor. Make sure your oven is off and unplugged prior to attempting to install the new sensor. If you’re uncomfortable installing it yourself, you can hire a repair person to install the part. 

With this quick guide, you’ll be on your way to quickly solve a GE Oven F3 Error. 

Make an Appointment